240 Coilover Hardware Kits for DIY Install
For the Front
- Coilover Sleeves and 2.5" Lower Spring Perches
- Low Profile 2.5" Upper Spring Perch
- Weld Rings
- 2.5" ID Eibach Racing Springs, Different Rates and Lengths available for no extra charge
- For Lifted Applications only, a section of Strut tube for extending housings and an internal strut spacer.
For the Rear
- Adjuster Rear Spring Perch for 5.0" OD Springs
- 5" OD Eibach Racing Springs, Different Rates and Lengths available at no extra charge.
This is our complete coilover hardware kit which allows you to modify your own strut housings, weld on the stop rings, and install coilovers.
Coilovers are not just for lowering a car, they can be beneficial for many reasons. The three key ones are the ability to tune the ride frequency via the spring rate, increasing the front alignment adjustment range, and ride height adjustment.
If you use the Luxe Steer setup they must be paired with one of our strut mounts.
The Front & Rear Hardware kit includes:
- Weld Rings
- Low Profile Upper Spring Perch
- Coilover Sleeves and Lower Spring Perch
- Eibach Springs (2 Front & 2 rear)
- 2 sections of tubing to weld onto your factory strut housings
- Rear Adjustable Spring Perches
FRONT STRUT MODIFICATION INSTALL GUIDE: